Reflector bounce Kit 1mt x 2mt 5in1 Reflector Kit with Quick Assemble Frame & Holding Arm.

The frame is made of light weight aluminium. The 6 poles that click together to hold the reflector can be assembled in seconds rather than minuets. The cross bar that accepts the pole bracket can be positioned in the middle or either end. The pole bracket once on the cross bar need not be taken off unless required but it takes a minimum of space. The pole that is used to elevate the reflector is 2.7 meter  long approx and means it can be placed on the ground and still provides a lot of elevation for the panel. Once you lift it up obviously your then only governed by a person’s  height . The pole bracket has been designed to accept a spigot so a stand can be used providing care is taken in correctly positioning.

The frame is also usable without the pole and can due to its light weight be just held by hand.. Unlike standard coil up reflectors it holds its shape and doesn’t collapse with a bit of wind so you can raise it above your subject with much less risk of an accident. The size is ideal for full length illumination being 2 x 1 meters.

The panels can be easily positioned onto the frame and have a Velcro attachment holding them firmly in place. There are x2 double sided panels: Gold/ silver and Black/white . the translucent panel is a single panel.

The translucent panel is great for use when the sun intensity is hard to control and the high lights are in danger of burning out. With the diffusion panel attached this will reduce the ratios of light back to a usable level meaning you can work throughout the day a lot easier.

The panels are used in a similar way to a reflector:

A gold panel for warming subjects like skin or golden healthy appearance

A silver panel for contrasty light or specula high lights

A white panel to fill in shadows

A black panel to block or absorb light

The whole kit comes in a convenient back that makes it easy to transport around with you.

Support stand not included